First fish on my Bamboo Rod – Yeah Rah!

Dave and I headed out to the Fall River today. As you can see from the pictures – we have had just a tad bit of snow. Since I finished the rod in mid- January today was the first day we were able to get on the water. And at approximately 11:30, Friday, February 10th – I hooked and land my first fish a 12 inch rainbow on my personal crafted bamboo rod! It was a joy to build this rod and a hoot to get that first fish. Dave offers Bamboo Rod Building classes – you won’t be disappointed in building your own and then fishing it.

The hike to my favorite spot on the fall river!

The hook-up

In the net – whew!  This was a fish I didn’t want to lose!

Had to have a classic grip and grin shot of my first fish – and it was a rainbow!

Pure Beauty

Thanks Dave for all you guidance in building my rod – nothing like having my own built bamboo fly rod.

 

Building A Bamboo Fly Rod – Day 7

Wow – my bamboo rod is finished.  Last time I posted I had just completed getting my bamboo rod to a “blank” state. What remained was the finishing and wrapping.

For the finishing  I used rub-on coats of Tru Oil, often used to finish gunstocks.  Each application took 10 to 15 minutes. It pays to do multiple coats and have a good 4 hours of dry time between coats. For me this was completed in a period of 4 days.

 

OLYMPUS DIGITAL CAMERABefore applying the finish – one more sanding of the blank.

OLYMPUS DIGITAL CAMERA

Before applying the finishing, I did make sure to get my signature and rod size onto the rod blank.

OLYMPUS DIGITAL CAMERA

An application of the finish.

 

OLYMPUS DIGITAL CAMERA

A  polish on the rod – before wrapping.

With the finish as sharp as I could get it – it was now time to wrap. Rather than just do a one color wrap, I opted to do a two-color tipping. The main wrap is functional as it holds the guide in place – but the two smaller wraps really are accent colors. This was my second wrapping of a rod and I had never done the two tippings. Although tedious and many re-wraps I did get the wrapping done. I am very happy I took the extra time for the two color tipping. Each 5th wrap I would then stack the thread – to get a very clean look on the wraps. When a wrap was complete I applied one coat of varnish – to ensure it didn’t unravel. When all the wraps were complete I applied 10 coats of varnish – with two “sanding of the wraps” – again to get the cleanest look I could.  Needless to say the wrapping did a good bit of time, about 20 hours. The varnish again, was a quick 10 to 15 minute task, but like the finishing, the dry time between applications meant it took multiple days.

OLYMPUS DIGITAL CAMERA

Wrapping the final tipping to the agate stripping guide.

OLYMPUS DIGITAL CAMERA

Packing the wraps

OLYMPUS DIGITAL CAMERA

Applying the first coat of varnish.

 

I have to say – there was a time and duration investment in applying the finish, wrapping, and varnishing the wrap – but it paid off in a extremely clean looking rod. Yes I am proud of myself and would love to jump into building another rod. Thank you for following my rod building project.

 

OLYMPUS DIGITAL CAMERA

A close up of the reel and ferrule

OLYMPUS DIGITAL CAMERA

Voila – my custom crafted bamboo rod.

OLYMPUS DIGITAL CAMERA

Yes a bit of snow of the ground – but that didn’t deter me from casting. Love the action – has the guts to cast big flies in windy conditions.

Building A Bamboo Fly Rod – Day 6

As you will see by the end of this post – my rod is really looking like a bamboo fly rod. Reminds me a bit of like tying – starting with raw materials and uncertain of what the outcome will be – and with each build step it looks more& more  like a fly rod! It definitely does now.  After the gluing process – I had a bamboo rod blank! Next up the a series of steps to 1) fit the ferrules, 2) make the grip, and 3) prep the rod for the reel set.

Fitting the Ferrules

The first step was working through some numbers – One making sure I had the proper ferrule size and Two, determine the appropriate cut length for the tip and butt sections. There were lots of short steps to get the ferrules mounting all requiring precision work. The first was the first cut on the bamboo – scary. But really minimal risk if you “measure twice and cut once” I took a photo of the cross section of the rod at this point – I just love the cluster of power fibers you can see – these power fibers are what give bamboo it’s strength and sensitivity. Next, started the hexagonal shape needed to be “rounded” for the round ferrule. Additionally, there was flaring on the ferrule and bamboo to ensure a tight fight – thus  distributing the pressure points so as to reduce the chance of breaking at the ferrule. Oh – it hurts to think about a break at the ferrule – but it can happen.

OLYMPUS DIGITAL CAMERA

Doing the math – so sort out the points to cut the bamboo blank

OLYMPUS DIGITAL CAMERA

Cutting the rod blank

OLYMPUS DIGITAL CAMERA

Check out the power fibres – I will always be in awe of strength yet sensitivity of the power fibers.

OLYMPUS DIGITAL CAMERA

Sanding down the ferrule.

OLYMPUS DIGITAL CAMERA

Fitting the male ferrule to the rod

 

Making the Grip

The first step was to pick the 12 cork rings that would be glued together and sanded down to make the grip.  Lots of sanding with the lathe to go from the cork rings to the final grip. And of course it fits my hand perfectly.  Before the final sanding of the grip, I turned down the hexagonal shape to a round shape that the real seat fits over.

 

 

OLYMPUS DIGITAL CAMERA

Turning the bamboo rod for the real seat placement.

OLYMPUS DIGITAL CAMERA

Only the best cork for my rod!

OLYMPUS DIGITAL CAMERA

Gluing the cork pieces to the rod butt.

OLYMPUS DIGITAL CAMERA

The final sanding to on the grip.

 

Gluing and Bluing the Ferrules

No elaborate magic here – but a bit unnerving to light the glue to burn off the solvent.

 

OLYMPUS DIGITAL CAMERA

Prepping the female ferrule for glue – cleaning out any dirt and grease.

OLYMPUS DIGITAL CAMERA

Applying the glue

OLYMPUS DIGITAL CAMERA

Lighting the glue on fire – just for a second – don’t want to light the rod on fire.

OLYMPUS DIGITAL CAMERA

The Ferrules all glued on!

It looks like a Bamboo Fly Rod

OLYMPUS DIGITAL CAMERA

What remains? Multiple coats of a rub-on finish and wrapping the guides.

Building my own Bamboo Rod – Day 4

Too fun! Too creative!  I am  mid-way through building my bamboo rod. I realized today how valuable this experience of building a bamboo rod is.

  1.  I fish bamboo – but I am really learning the characteristics of the bamboo material and build process that make bamboo, such a great fly fishing rod.
  2.  I am building skills with woodworking that I never had the opportunity to. If only I could have taken wood shop in high school! It  feels marvelous  to accomplish new skills.
  3.  As a fly fishing instructor, this is a good reminder of how intimidating and overwhelming learning a new skill can be. A humbling moment –  note to self “Remember when you teach fly fishing that you may know the ins and outs but the student doesn’t, so be cognizant and respectful of where they are at”.

So for the past few days I have been hand planing away at the rough formed strips of bamboo.  I would hand plane a few hours and then take a break. All in all, I think I planed for about 10 hours.  In all honesty, I was a bit overwhelmed and un-nerved with the first few strips I planed. With each new strip,I built confidence and appreciation for the hand planing process. I sensed a bit of sadness today  when  I finished hand planing my last piece, #12. I realized I had grown to really appreciate the zen and beauty of planing. It was amazing to see the  symmetry of each piece and the luster of the natural power fibers of bamboo develop with each pass of the hand plane.

 

OLYMPUS DIGITAL CAMERA

A photo from afar – you can see the planing form, the hand planer and the pile of bamboo shavings that slowly grow with each new pass of the plane.

 

OLYMPUS DIGITAL CAMERA

A photo from close-up. Given you a sense of the progress, new shavings, that occur with each pass of the plane.

 

So let’s talk a bit about the hand planing process. For starters the planing form is set twice, once for the butt section and another for the tip section.

 

OLYMPUS DIGITAL CAMERA

After I finished the six strips for the tip, I re-set the planing form for the dimensions of the butt section.

 

I always knew the hand planing process was time consuming and precision was paramount, but I never realized that a very important step between each strip was to sharpen the blade on the hand planer. At first, again I was skeptical of my ability to do this. However, by the last strip – sharpening the blade was as cool as hand planing. Making sure the blade was inserted precisely for the angle and depth is truly a hidden step of the accuracy and preciousness of each strips dimensions.

 

OLYMPUS DIGITAL CAMERA

Sharpening the blade with a black Arkansas stone.

 

So I finished hand planing today. What was really amazing was to see the transformation in the pieces of bamboo.  Check it out!

 

OLYMPUS DIGITAL CAMERA

The bamboo strips just after the hand split process.

 

OLYMPUS DIGITAL CAMERA

The bamboo strips after hand planing and all ready to glue up. 

 

OLYMPUS DIGITAL CAMERA

The tips of the rod – notice how fine they are up against the shavings.

 

OLYMPUS DIGITAL CAMERA

Just bringing the strips size into perspective. Each of the 6 strips that will be form the tip section are .032″ of an inch at the tip-top.  Looks smaller than a toothpick to me!

 

 

 

 

 

 

 

 

Building my own Bamboo Fly Rod – Day 3

Today, I continued with the process of building my bamboo rod. My start point today was with the 16 pieces that I had done the initial beveling to get to a triangular shape.  The first step was to send the pieces through the beveler to get closer to the final dimensions. We took off about .03 of an inch with each pass.

OLYMPUS DIGITAL CAMERA

Another run or two through the beveler shaving .03 inch of each pass.

 

At this point I picked the final 12 split pieces of bamboo from my initial 18 . I choose 6 from each culm – my choice selection was a mix of the look of each split and how straight it was.  3 pieces from each culm will make up the butt and tip sections. I set the other four to the side – just in case!

Next step  up – bevel in a rough taper into the final 12 pieces.

OLYMPUS DIGITAL CAMERA

The start of the rod taper – that determines the action of the rod.

 

OLYMPUS DIGITAL CAMERA

Another angler on the rough tapering step.

 

The next step was to straighten each strip of bamboo. Straightening the bamboo at this point will enable the hand planing process to be smoother and more precise.  To get the bend out of the bamboo you bend the rod in the opposite direction over a heat – until the bend has been removed.

 

 

OLYMPUS DIGITAL CAMERA

A bend that needs to be straightened.

 

OLYMPUS DIGITAL CAMERA

Apply pressure  in the opposite direction over heat to straighten

 

OLYMPUS DIGITAL CAMERA

A straightened piece of bamboo.

 

OLYMPUS DIGITAL CAMERA

All twelve pieces ready for the hand planing process. You can see the difference is the size for the butt versus the tip section

 

Next step – setting the depth on the planing form to create the desired taper for my 8′ 6 wt rod. Accuracy is key with this step – so I did double check my settings and then Dave checked me. We set the specific taper depth at every 5″ mark – the depth for the tip section started at .104″ and ended at .028″

 

OLYMPUS DIGITAL CAMERA

Setting the depth on the planing form with my taper sheet as a guide.

 

Today – I just got started on the hand planing process. I anticipate it will take me about 4 to 6 hours to plane all the strips.

OLYMPUS DIGITAL CAMERA

Planing my first strip – 1/2 way done with one strip and then 11 more.